Install Floating Shelves
Learn to mount beautiful floating shelves that can hold real weight without visible brackets.
Step-by-Step Instructions
Find the Studs
Use a stud finder to locate the wall studs where you want to mount your shelves. Mark each stud with a pencil. Mounting into studs provides the strongest support.
If you can't hit studs, use heavy-duty wall anchors rated for your shelf's weight capacity.
Mark Your Shelf Position
Hold the shelf bracket against the wall at your desired height. Use a level to ensure it's perfectly horizontal, then mark the screw hole positions with a pencil.
For multiple shelves, measure from the ceiling down for consistent spacing.
Install the Mounting Bracket
Drill pilot holes at your marked positions. Attach the mounting bracket to the wall using the provided screws. Double-check that the bracket is level before tightening fully.
Start with one screw loose, level, then tighten all screws.
Slide On the Shelf
Most floating shelves slide onto the mounting bracket. Align the shelf with the bracket and push it firmly into place. Some designs may require set screws underneath.
Have a helper support the shelf while you secure it.
Final Check and Styling
Give the shelf a gentle pull to ensure it's secure. Use your level one more time to verify it's straight. Now you're ready to add your decor!
Don't exceed the weight limit - check your shelf's specifications.
Project Complete!
Congratulations on finishing your install floating shelves project!